A heat pump reduces the cost of heating your home and therefore your electricity bills.
The function of a heat pump is to produce more heat energy than it consumes. For every 1kW of heat energy used, the pump produces 4-5kW worth of heat. On top of this, you can apply to your distributor for a discounted rate, so your energy bill will be reduced even further.
The technology of typical air source heat pumps means that as the outside temperature drops, their efficiency and heating output decreases. The pumps on the market are fitted with electric heaters to support the operation of the unit.
FERIS air source heat pumps are designed for aggressive weather conditions, are larger than typical units, have large evaporators and the patented iFROST defrost system. The units operate down to -28°C and use air to produce heat energy without the use of electric heaters.
The units are equipped with state-of-the-art fans with EC motors that achieve efficiencies of over 90% and energy savings of up to 50% compared to conventional motors. These motors are quieter over the entire speed range and have a much longer life and reliability. A major advantage of the fans is their ability to adapt to the desired airflow by limiting the speed while maintaining very high efficiency.
The large-diameter fan installed in FERIS heat pumps allows the speed to be reduced while maintaining the desired airflow, thereby reducing noise levels in real terms and providing airflows of 3 000 to 10 000 m3/h.
combining EVI steam injection with an inverter compressor and obtaining high efficiency, high heating medium parameters and low power gradient.
The heat pump achieves much higher efficiency compared to a gas boiler. You can save up to two thirds of the cost compared to gas heating. Thanks to the online app, you can also control the temperature in your home remotely.
Installation is completed in 1-3 days. The heat pump can be connected to your current heating system.
To ensure a longer life of the pump, a service once a year is recommended.
Switching from a boiler to a heat pump means changing to a completely eco-friendly solution. No more fuel or gas is burned and the energy is obtained in a renewable way. Heat pumps generally reduce CO2 emissions by 70%!